Buing a snowboard
Tips to make your purchase of a snowboard a success
Buying a snowboard naturally starts with brand and type of orientation. Which snowboard brand you will find fit for yourself and which brand has the snowboard you are looking for. Soon you'll see the brands throwing terms, so you won't see the wood for the trees anymore.
Freestyle, backcountry, splitboards, all-mountain freestyle snowboards. And then this is only a small selection of the range of cries you get around your ears. Although we preach for your own parish that you can buy a snowboard online, we would like to present you with a number of things that will make it a little easier to make your choice. Online or offline.
Be an honest snowboarder....
Of course we all think we can be Shaun White of Travis Rice. But if you are very honest with yourself, however, you know that after the exception we all want to slide off the mountain with occasional powder or a rampart. Is not at all bad, because that makes this sport so cool. That you can do it when and where and how you want to do it yourself. But if you don't know what you want, then it becomes difficult to make a good snowboard choice.
Sturdy stiff snowboard offcourse?
A snowboard has two types of flex types. The flex over the length of the snowboard and the flex over the width of the snowboard are also called torsional stiffness. These two flexes are related. A soft snowboard with high torsional stiffness will be different from a snowboard with low torsional stiffness and rigid length flex. But you can leave that to the manufacturers that they find the best mix for you. What do you notice from the different flexes in a snowboard. The stiffer a snowboard, the better it can be handled at higher speeds and in cut bends. Is top for when you are advanced, but if you have just started, then a softer snowboard is more delicious and will give you more fun. A smoother snowboard does better at low speeds and is therefore suitable for beginners. A board with a softer flex will help you improve your curves and technique. Most freestylers also feel better on a snowboard with a softer flex.
Length and width of a snowboard
The key question is often, how long should my snowboard be? The length of your snowboard depends on your weight. The heavier, the more grip you lose in the turns on a snowboard that is too short. If you are light and stand on a snowboard that is too long, then the person has too little weight in the bowl to change sides. Such a person will experience that the snowboard responds slowly. The width is also important in this respect. If you have small feet, but still heavy in size, then you will have to take into account the width of the snowboard. Often the snowboards also become longer to get a wider snowboard. Fortunately, there are already many manufacturers that take into account shorter snowboards with "wide" waist sizes. The waist is the narrowest part of the snowboard in the middle.
It is important that you create as little as possible and complete conduct. Touching and whole-bearing means that your shoes hit the snow on both sides of the snowboard. Meaning that you slow down and in extreme cases look at the snow from close up. A snowboard that is too wide for your feet shows the problem of a slow edge change because it is too far from the pressure points. A good seller can help you through this process, but with a bit of common sense you'll come to an end. With a size 46 on a 146cm snowboard is a mission impossible.
Radius of your snowboard
The radius of the snowboard is indicated in meters. The side of your snowboard is part of a full circle. The smaller the radius, the shorter the curves.
Do I need a Freestyle, Freeride or Allmountain snowboard?
The snowboard lines categorise themselves into three different types of snowboard lines (actually 4, but alpine snowboards are a special case. Freestyle, Freeride and Allmountain snowboards are the most common terms.
1. Freestyle snowboard
Freestylen is a broad concept. Here you also have subgroups like boys who sit in the park all day on kickers and slides. This way you have the rail members, who do nothing but look up rails. If necessary in their own street to go off and then you still have the happy few who are looking for the halfpipe. What they have in common is that they want to perform the tricks as good and fat as possible. These snowboards often have a twin shape, which means that the front and back have the same shape in terms of flex and shape. So whether you're going backwards or forwards (fakie or switch), the board always performs the same way.
2. Freeride snowboard
The backcountry snowboarding and always looking for that white gold. Preferably one metre deep. Not always in stock, but always worth looking it up. Freeride snowboards such as those of Jones Snowboards are generally intended for better powder work. Often have a directional shape. What so much content that the board becomes a little stiffer towards the back and the taillering also gradually builds up towards the back. The stiffness in the back is nice to let the nose float more in the powder. A stiffer tail also comes in handy on the piste when cutting curves. These snowboards are quite stiff, so not suitable for beginners.
3. Allmountain snowboard
These are the all-rounders. Whether you're entering the park, powder off-piste. It's all no problem and these snowboards guide you through it without any problems. Of course there is also a difference in the structure of the snowboards. Some are more freeride oriented and some more freestyle. For example, in a 60-40% ratio. The brands often indicate where they are heading....